Do you use a room that could make use of a ceiling fan to cool it down Its not really difficult to install a ceiling fan yourself if you are considering to replace a light fixture. All of the wiring will already be there, hence the only barrier will be replacing the pre-existing workbox with one that is accepted for the weight of a ceiling fan. Hanging your new ceiling fan on an existing box that won't support the extra weight of the fan could lead to disaster. Right before you carry out anything, read the manuals for your fan very thoroughly and make sure you have the essential tools.

If you plan to get the fan on the cathedral ceiling, you must purchase an extension to ensure the fan wont be so high up. Once you are all set for the exact installation, make sure that the breaker is put off, so no power is going to the light you are changing. Anytime you remove the light fixture, check to see if the pre-existing workbox can handle the increased weight woodworking plans. On most occasions, the workbox is not going to be able to take on the extra weight so you may need further support. Including support to the workbox is not that tough if you have access to the light fixture from the attic.

To add support, you simply nail a 2x4 between the ceiling rafters so that it touches the top of the workbox. Be positive that the 2x4 is secured and then attach on the box to the wood. If you did it accurately, the weight of the fan really should be effectively supported by the 2x4 wood and screws. In the event that you are not able to do it from the attic space or you have no attic, you will want to include a cross bracing in your ceiling. pre made woodworking plans This is more difficult to do, and probably not as safe in the end, but will probably have to do with no attic entry.

So now, after setting up the fan based on the instructions, you are ready to place the new fan. The issue is to keep the fan while connecting the wiring. The problem is depending on the type of fan you acquire, whether it is a hanging frame or a fan that has a bracket with a J hook. Most of fans require a chain to operate the speed of the fan and the wall switch turns the device on or off. If you determine to also mount a light kit with the fan, both can be operated by either chain or wall switch.

Wiring the fan is as simple as connecting two black wires, two ground wires as well as white wires woodwork projects. As soon as you have completed the wiring, all you need to do now is affix the blades. Once this is all carried out, it is time to flip the breaker back on to see if it functions.